METRIC
MIL-DTL-20517J (AR)
27 January 2011
SUPERSEDING
MIL-S-20517 H (AR)
04 JANUARY 1984
DETAIL SPECIFICATION
SIMULATOR, PROJECTILE, AIR BURST, M74A1
PARTS FOR AND LOADING, ASSEMBLING AND PACKING
This specification is approved for use by the U.S. Army Armaments Research, Development and
Engineering Center (ARDEC), and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 This specification is for the fabrication of parts and assembly of one type of flash and
sound simulator designated as Simulator, Projectile, Air Burst, M74A1.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3 or 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 or 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to the
Commander, U.S. Army ARDEC, ATTN: RDAR-QES-E, Picatinny, NJ 07806-5000 or
emailed to ardecstdzn@conus.army.mil Since contact information can change, you may
want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 1370
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business