E, herein after referred to as the igniter.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MIL-DTL-85547C (OS)

requirements of MIL-R-85545 using the associated sampling plan may be used to satisfy quality

conformance static fire requirement for a quantity of igniters being packaged with a single lot of GTR-

18A rockets. Following the static firing, verify that all performance requirements have been met (see 3.3).

4.6 First article and quality conformance inspection report. A first article or quality conformance

report (see 6.3) shall be available to the acquiring activity within the time frame specified (see 6.2). The

report shall contain the following information:

a. Date of report

b. Date of inspection

c. Lot number

d. Manufacturer

e. Operational objectives

f. Test equipment used

g. Environmental conditions of inspection

h. Type of failure, if any

i. Analysis, significance, and recommendations

j. Disposition of parts

k. Corrective action taken

4.7 Inspection of Packaging. The sampling and inspection of the preservation, packing, and container

marking shall conform to this specification (see section 5).

5. PACKAGING

5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract

or order (see 6.2, and 6.6). When packaging of materiel is to be performed by DoD or in-house contractor

personnel, these personnel need to contact the responsible packaging activity to ascertain packaging

requirements. Packaging requirements are maintained by the Inventory Control Point s packaging

activities within the Military Service or Defense Agency, or within the military service s system

commands. Packaging data retrieval is available from the managing Military Department s or Defense

Agency s automated packaging files, CD-ROM products, or by contacting the responsible packaging

activity.