MIL-P-48239 (MU)
instructions issued by the Contracting Officer. All
samples submitted shall have been produced by the contractor
using the same production processes, procedures, and
equipment as will be used in fulfilling the contract.
All materials, including packaging and packing, shall
be obtained from the same sources of supply as will be
used in regular production. The sample shall be
accompanied by certificates of analysis. A first
article quantity, or portion thereof', as directed by
the Contracting Officer, shall also be submitted
wheneversthere is a lapse in production for a period
in excess of 90 days, or `whenever a change occurs in
manufacturing process, material used, drawing, specification
or source of supply as to significantly affect product
uniformity as determined by the Government. Prior to
submission, the contractor shall inspect the sample to
the degree necessary to assure that it conforms to the
requirements of the contract and submit a record of this
inspection with the sample. A sample containing
known defects will not be submitted unleSS specifically
authorized by the contracting Officer.
4.2.2 Inspections to be performed. The sample will
be subjected by the Government to any or all of the
examinations or tests specified in 4.4. of this
specification.
4.2.3 Rejection. If any sample fails to comply
with any of the applicable requirements, the first article
quantity shall be rejected. The Government reserves
the right to terminate its inspection upon any failure
of a sample to comply with any of the stated requirements.
4.3 Inspection previsions
4.3.1 Lot formation. A lot shall consist of one
or more batches of photoflash powder produced by one
manufacturer, in accordance with the same specification,
or same specification revision, under one continuous
set of operating conditions. Each lot shall consist
of that quantity of photoflash powder that has been
subjected to the same unit chemical or physical mixing
process intended to make the final product homogeneous.
The product shall be submitted for inspection in
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business