INCH-POUND
MIL-DTL-10058J
10 June 2010
SUPERSEDING
MIL-S-10058H (AR)
3 February 1982
DETAIL SPECIFICATION
SIMULATOR, PROJECTILE, GROUND BURST M115A2
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification describes the parts, assembly and verification methods for
the Simulator, Projectile, Ground Burst: M115A2.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3 or 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 or 4 of this specification
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to the Commander,
U.S. Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, NJ 07806-5000 or emailed to
ardecstdzn@conus.army.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online at https://assist.daps.dla.mil.
AMSC N/A
FSC 1370
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business