MIL-S-12730E(AR)
3.8 Workmanship. All parts and assemblies shall be fabricated
and loaded in a thorough workmanlike manner. They shall be free of
burrs, sharp edges, cracks, dirt, rust and other foreign matter.
The cleaning method used shall not be injurious to any part nor
shall the parts be contaminated by the cleaning agent. Exterior
surface coatings shall be continuous except for a few light
scratches not exposing base material. All required markings shall
be neat and sharply defined.
QUALITY ASSURANCE PROVISIONS
4.
4.1 Reponsibility for inspection and standard quality
Unless otherwise specified herein or in the
assurance provisions.
contract, the provisions of MIL-A-48078 shall apply and are hereby
made a part of this detail specification.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item:
First Article Inspection
a.
b.
Quality Conformance Inspection
First article inspection.
4.3
4.3.1 Submission. The contractor shall submit a first article
sample as designated by the Contracting Officer for evaluation in
accordance with provisions of 4.3.2. The first article sample shall
consist of the items in sample quantities as indicated in Table I.
See MIL-A-48078 and Table I
4.3.2 Inspections to be performed.
specified herein.
Rejection.
See MIL-A-48078.
4.3.3
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business