MIL-DTL-10057J
9345134
-
Safety fuze cord
12912921
-
Priming paste support
12972326
-
Flash Composition
13013011
-
Spacer tube
13019988
-
Cover and Body Loading Assembly
13019989
-
Flash Composition
(Copies of these drawings may be requested online at pica.drawing.request@conus.army.mil or from
U.S Army ARDEC, ATTN: RDAR-AIS-TD, Picatinny, NJ 07806-5000.)
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
NON-GOVERNMENT STANDARDS
ISO 10070
-
Determination of envelope-specific surface area from
Measurements of the permeability to air of a powder bed
Under steady-state flow conditions
(Copies of this document are available from www.iso.org or International Organization for
Standardization Case Postale 56, CH-1211 Geneve 20, Switzerland)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the even of a
conflict between the text of this document and the references cited herein (except for related
specification sheets), the text of this document takes precedence. Nothing in this document, however,
supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Requirement inspections.
3.1.1 First article. When specified, a sample shall be subjected to first article inspection in
accordance with 4.2.
3.1.2 Conformance. A sample shall be subjected to conformance inspection in accordance
with 4.3.
3.2 Components and assemblies. All materials, components and assemblies shall be in
accordance with the requirements on the drawing listed in paragraphs 4.3.2.1 4.3.2.11.
3.2.1 Disc. The disc material and dimensions shall be in accordance with 9256461.
3.2.2 Upper disc. The upper disc material and dimensions shall be in accordance with
9256462
3.2.3 Inner tube. The inner tube material and dimensions shall be in accordance with
9256464.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business