MIL-DTL-10057J
3.3.2 Flash composition formulation. The formulation for the flash composition for part
number 9256467-1, (NSN-1370-01-557-8460) shall be in accordance with 12972326 and shall be in
accordance with 13019989 for part number 9256467-2 (NSN 1370-00-752-8124).
3.3.3 Flash composition granulation. The granulation for the flash composition for part
number 9256467-1, (NSN 1370-01-557-8460) shall be in accordance with 12972326 and shall be in
accordance with 13019989 for part number 9256467-2 (NSN 1370-00-752-8124).
3.4 Jumble. When subjected to a jumble environment, the simulator shall comply with the
following requirements:
a. The simulator shall not function during test.
b. There shall be no loose pyrotechnic powder on the simulator or in the test box after
jumbling.
c. The simulator components shall not separate during the test.
3.5 Functioning requirements. The simulators shall function at ambient (70° ± 5° F) and cold
temperatures (minus 65 ±5° F) and shall comply with the following requirements:
3.5.1 Premature delay. The simulator shall not function prematurely (less than five (5)
seconds delay) and the delay time shall be greater or equal to six (6) seconds and less than or equal to
twelve (12) seconds. The average of all delay times for the complete acceptance test shall not be
more than 8.5 seconds.
3.5.2 Sound level. The sound level intensity shall be not less than 125 decibels at a
distance of 75 ± 0.5 feet from the simulator.
3.5.3 Pull cord. The pull cord shall not break or otherwise separate from the pull wire when
used to function the simulator.
3.6 Ammunition lot numbering. Ammunition lot numbers shall be assigned in accordance
with MIL-STD-1168.
3.7 Workmanship. All parts and assemblies shall be free of burrs, chips, sharp edges, cracks,
crazes, unblended radii, porosity, warpage, burn marks, checks, chipped edges, blisters, excess flash,
dirt, and other defects and foreign matter which would affect their serviceability. The cleaning
method used shall not be injurious to any part nor shall the cleaning agent contaminate parts.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business