MIL-DTL-20517J (AR)
(Copies of these drawings are available online from Drawing-Request@pica.army.mil or from
US Army ARDEC, ATTN:RDAR-EIS-PE, Picatinny, NJ 07806-5000).
2.3 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
ASTM INTERNATIONAL
ASTM D 695
-
Standard Test Method for Compressive Properties
of Rigid Plastics
ASTM E 1742
-
Standard Practice for Radiographic Examination
ASTM E 300
-
Standard Practice for Sampling Industrial
Chemicals
(Copies of this document are available from www.astm.org or ASTM International, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959)
NATIONAL AEROSPACE STANDARD
NAS 410
-
NAS Certification & Qualification of
Nondestructive Test Personnel
(Application for copies should be addressed to the Aerospace Industries Association of America,
1000 Wilson Boulevard, Suite 1700 Arlington, VA 22209)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a first article sample be subjected to first
article inspection in accordance with 4.2.
3.2 Components and assemblies.
3.2.1 Black powder. The black powder shall be produced in accordance with MIL-P-
00223 and moisture content at time of loading shall be in accordance with drawing 12977377.
3.2.2 Flash powder. The flash powder composition and moisture content at time of
loading shall be in accordance with drawing 8848485.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business