MIL-DTL-20517J (AR)
3.2.3 Tube. The tube shall have dimensions and compressive strength in accordance with
drawing 8848484.
3.2.4 Wad. The wad shall have moisture content at time of loading in accordance with
drawing 8848486.
3.2.5 Gas check washer. The gas check washer shall have moisture content at time of
loading in accordance with drawing 8848486.
3.2.6 Filler. The filler shall have moisture content at time of loading in accordance with
drawing 8848486.
3.2.7 Impulse cartridge. The impulse cartridge shall be fully crimped (see 6.7), complete
and having all dimensions in accordance with drawing 12991624.
3.2.7.1 Propellant charge. The propellant charge in the impulse cartridge shall be no less
than 0.500 grams and in accordance with drawing 12991624.
3.2.7.2 Primer. The primer shall be below flush, but no greater than the maximum in
accordance with drawing 12991624. The primer shall not be deteriorated (see 3.5) upon
assembly into the simulator assembly.
3.2.8 Body. The body shall have dimensions in accordance with drawing 12991625
3.2.9 Closure disc. The closure disc shall have dimensions in accordance with drawing
12991626
3.2.10 Closure washer. The closure washer shall have dimensions in accordance with
drawing 12991627,
3.2.11 Fuze housing. The fuze housing shall have an unobstructed fuze hole and
dimensions in accordance with drawing 12977376.
3.2.12 Fuze assembly. The fuze assembly shall have undamaged threads and no cracks.
The fuze assembly shall be in accordance with drawing 12977377.
3.2.12.1 Charge. The charge making up the fuze shall be flush or below flush at either
end of the fuze in accordance with drawing 12977377.
3.2.12.2 Fuze delay composition. The fuze delay composition shall be consolidated in the
fuze housing and in accordance with drawing 12977377.
3.2.13 Fuze assembly complete. The fuze assembly shall not be empty or improperly
loaded including voids, missing increments and inconsistent densities. The fuze assembly shall
have a cone at the end of the fuze assembly in accordance with drawing 12977377.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business