MIL-DTL-20517J (AR)
4.3 Conformance Inspection.
4.3.1 Inspection lot formation. Inspection lots shall comply with the lot formation
provisions of MIL-STD-1916, Acceptance by tables. In addition, inspection lots of simulators
shall contain:
a. Parts of one interfix number from one supplier.
b. Composition ingredients from not more than one lot from one supplier
c. Class V black powder from not more than one lot.
d. Class VII black powder from not more than one lot.
e. Percussion primers from one lot interfix number from one supplier
f. Flash composition and delay composition of one or more batches produced under
continuous set of operating conditions, with each batch of the composition having been subjected
to the same physical mixing process intended to make the batch homogeneous.
4.3.2 Classification of Characteristics.
a. Sampling Requirements. Where identified herein, conformance inspections shall be by
classification of characteristics. Characteristics are classified in accordance with MIL-STD-
1916. (See 6.10)
b. Conformance inspection. Conformance inspection shall be performed in accordance
with paragraph 4.3.2.1 through 4.3.2.21.
c. Acceptance Criteria. The Inspection Quantities accept/reject criteria for sampling
inspection shall be as specified in MIL-STD-1916 for the applicable level.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business